BASETech 75 18 05 Manuel D'instructions page 3

OPERATING INSTRUCTIONS
8.9 cm LCD Colour Monitor
Item-No. 75 18 05
Intended Use
This 8.89 cm (3.5") colour monitor is intended to be installed in, and for protecting of,
secluded or critical areas (e.g. entrance areas, surveillance of underground car parks)
together with a suitable security camera.
The monitor as well as the wall plug transformer are solely intended for use in dry
indoor locations.
The monitor is powered via 12 V/DC (a suitable power supply is available as an
option).
Please note that, it is prohibited by law to observe or record strangers with this monitor
and a suitable camera without their knowledge and consent.
Operating the product in any other way than described above is not permitted and may
lead to damage to the product, which can give rise to risks such as short circuit, fire and
electric shock. The product must not be modified or converted. Always observe the
safety instructions included in these operating instructions. Read the operating
instructions carefully and keep them for later reference.
Explanation of the Symbols
The lightening symbol warns of potential risks for personal injury, such as
electric shock.
The exclamation mark indicates specific risks associated with handling,
function and use.
The arrow symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to
observe these safety instructions! We will not assume any
responsibility for consequential damage!
We do not assume any liability for material and personal damage
caused by improper use or non-compliance with the safety
instructions. The warranty will be null and void in such cases.
• The monitor and the wall plug transformer must not be modified or con-
verted, as not only will the CE Approval be void but also the warranty.
• The monitor and the wall plug transformer must not be exposed to extreme
temperatures, direct sunlight, intense vibration, humidity or heavy
mechanical stress.
• After rapid changes in temperature, the monitor and the wall plug
transformer require some time to stabilise, in order to adjust to the ambient
temperature, before they can be used.
• Electronic devices are not toys and should be kept out of the reach of chil-
dren!
• Please contact qualified personnel if you are unsure about the safety or the
correct use of the delivered products.
• Never leave the packaging material lying around unattended. Plastic-
foil/bags etc. can be dangerous playthings for children, there is a risk of
suffocation.
• If you have reason to assume that safe operation is no longer possible, dis-
connect the device immediately and secure it against inadvertent
operation.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device does not function any longer and
- the device has been stored under unfavourable conditions for a long
period of time or
- it has been subjected to considerable stress during transportation.
All manuals and user guides at all-guides.com
Version 05/10
Product view
1) Indicator LED
2) Display
3) „ON/OFF" button
4) „Image adjustment" button
• In commercial institutions, the accident prevention regulations of the
Employer's Liability Insurance Association for Electrical Systems and
Operating Materials are to be observed.
• The monitor, as well as the wall plug transformer, are only intended for use
in dry indoor locations.
• The monitor is powered via 12 V/DC (a suitable power supply is available
as an option).
• Ensure that all the electrical connections and connection cables between
the different devices and any extension cables conform to the regulations
and comply with the operating instructions.
• Live components may be exposed, if the covers are opened or parts removed
(unless this can be done without tools). Connection points may also be live. If
the appliance needs to be opened for calibration, servicing, repair or to
replace parts or circuit boards, it must be disconnected first from all sources
of current . If servicing or internal repairs are necessary, this must be carried
out by a specialist who is familiar with the risks involved and with the relevant
regulations.
• Capacitors in the device may still be charged, even if the device has been
disconnected from all power supplies.
• When installing / mounting the appliance, make sure that the connection
cable is neither pinched nor damaged by sharp edges.
• Disconnect the monitor from the power supply, if it is not to be used for a
while.
• Disconnect the monitor from the power supply before cleaning.
• For safety reasons, disconnect the monitor from the power supply during
thunderstorms.
• Never replace damaged mains cables yourself. In such case, disconnect
the device from the mains and take it to a specialist workshop.
• Never pour fluids out above electrical devices. You run the risk of causing a
fire or a fatal electric shock. In such a case, immediately disconnect it from the
power supply, remove the plug from the mains and consult an expert.
• Maintenance, adjustment and repair may only be carried out by a qualified
specialist or a specialised repair shop.
• If you have any questions, which are not answered in this manual, please
contact our technical service or another specialist.
Lights blue, as soon as the
monitor is switched on.
5) „Colour adjustment" button
6) „Brightness adjustment" button
7) „Contrast adjustment" button
8) Video in (Cinch")
9) Connection for power supply
12V/DC