Rip curl ALT2 Mode D'emploi page 2

English
Function. Dual Time with Timer, Chronograph, Alarm & Light
Display
To Set Time
1. In Time mode, ensure "T2" is not showing
on-screen. This indicates you are in TIME 1 mode.
2. Hold LAP/RESET for 3 seconds.
3. Push START/STOP to set the seconds to zero.
4. Push MODE to advance to minutes.
5. Push START/STOP to set the minutes
6. Repeat to advance through and set Hour, set
12/24 hr format, set Month, set Date and Year.
7. Push LAP/RESET to finish setting.
To Set Time 2 (Dual Time)
1. In Time mode, push START/STOP to enter time
2 (T2).
2. Hold LAP/RESET for 2 seconds to enter Dual
Time setting mode.
3. Push START/STOP to set the minutes
4. Push MODE to advacnce to hour
5. Push START/STOP to set the hour
6. Push LAP/RESET to finish setting
To Set Daily Alarm
1. In alarm mode (AL), push LAP/RESET for 3
seconds and the hours will begin to flash.
2. Push START/STOP to set the hour
3. Push MODE to advance to minute
4. Push START/STOP to set the minute.
5. Push LAP/RESET to finish the setting.
6. The alarm icon (
Push START/STOP to toggle on/o the Alarm ( )
and hourly chime (
To Set Timer
1. In timer mode (TR), push LAP/RESET for 3
seconds and the hours will begin to flash.
2. Push START/STOP to set the hour
LIGHT
MODE
) will automatically appear.
).
START/STOP
LAP/RESET
3. Push MODE to advance to minute
4. Push START/STOP to set the minute.
5. Push LAP/RESET to finish the setting.
Functions
Light Function
In any mode, push LIGHT to light up the digital
display screen for 3 seconds, before turning o
automatically.
Chronograph Function
1. In Chronograph mode (ST - Stopwatch). Push
START/STOP to start the Chronograph.
3. Push START/STOP to stop the Chronograph.
4. Push LAP/RESET to reset the Chronograph to
zero.
Chronograph Lap Function
1. While the chronograph is running, push
LAP/RESET to display a lap time.
2. Push LAP/RESET to restart the chronograph
and display entire elapsed time since starting the
chronograph.
3. Push START/STOP to stop the chronograph
4. Push LAP/RESET to reset the chronograph to
zero.
Timer Function
1. Follow instructions above to pre-set Timer to
desired time.
2. In Timer mode (TR) push START/STOP and the
countdown timer will begin.
3. Push START/STOP to stop the timer.
4. Push LAP/RESET to reset the timer