Publicité
• NEVER connect high pressure hose to nozzle extension.
• NEVER connect high pressure hose to nozzle extension.
• Keep high pressure hose connected to pump and spray gun while
• Keep high pressure hose connected to pump and spray gun while
system is pressurized.
system is pressurized.
• A lways be certain spray gun, nozzles and accessories are
• Always be certain spray gun, nozzles and accessories are
correctly attached.
correctly attached.
6. Similarly, attach other end of high pressure hose to high pressure
6. Similarly, attach other end of high pressure hose to high pressure
outlet (A) on pump. Pull down on collar of quick connect, slide onto
outlet (A) on pump. Pull down on collar of quick connect, slide onto
pump and let go of collar. Pull on hose to be sure of tight connection.
pump and let go of collar. Pull on hose to be sure of tight connection.
pW2700
pW2700
pW3100B
7. Turn Water Supply on, point gun in a safe direction and squeeze
7. T urn Water Supply on, point gun in a safe direction and squeeze
the trigger to purge the pump of air and debris. Do this for at least
the trigger to purge the pump of air and debris. Do this for at least
30 seconds.
30 seconds.
8. T ake a look at all connections to make sure there
8. Take a look at all connections to make sure there
are no leaks or loose connections.
are no leaks or loose connections.
IMPORTANT: DO NOT siphon standing water for
IMPORTANT: DO NOT siphon standing water for
the water supply. Use ONLY cold water (less than
the water supply. Use ONLY cold water (less than
100°F/38°C).
100°F/38°C).
9. T o start the machine, locate the engine switch
9. To start the machine, locate the engine switch
on the side of the machine & switch it to the
on the side of the machine & switch it to the
ON position.
ON position.
10. Move the fuel valve lever to the ON position.
10. Move the fuel valve lever to the ON position.
11. To start a cold engine, move the choke lever to
11. T o start a cold engine, move the choke lever to
the closed position. To restart a warm engine,
the closed position. To restart a warm engine,
leave the choke lever in the OPEN position.
leave the choke lever in the OPEN position.
12. Move the throttle lever away from the MIN
12. M ove the throttle lever away from the MIN
20
20
85.609.917 Echo Bear cat Pressure Washer Manual 2016.indd 20
85.609.917_90400033BE_PW2700_PW3000_PW3100B_PW4000_PW4200_Echo Bearcat Gas PW Manual 2017.indd 20
All manuals and user guides at all-guides.com
starting your washer
starting your washer
WARNING
WARNING
The high pressure stream of water that this
The high pressure stream of water that this
equipment produces can cut through skin and its
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
underlying tissues, leading to serious injury and
possible amputation.
possible amputation.
A
A
B
B
axial pump
axial pump
pW3000
pW3000
pW4200
pW4000
pW4000
A
A
B
B
triplex pump
triplex pump
2016-03-18 10:17 AM
22/02/2017 4:12:39 PM
Publicité
