Télécharger Imprimer la page

La Crosse Technology Wattz 2.0 Guide D'installation page 10

Publicité

Les langues disponibles

Les langues disponibles

APPENDIX
Specifications
Weather Station CA74962
Input:
5.0VDC 3.5A Power Cord
Power Requirements:
(Included) HX20A-0503500-AU
CR2032 Battery for backup (Included)
The plug on the power adapter is intended to serve
as the disconnect device, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
Indoor Temperature Range:
0°C to 50°C (32°F to 122°F)
10% to 99% RH
Indoor Humidity Range:
4 Intensity Levels + OFF
LCD Brightness:
(Programmable Auto-Dim Backlight option)
2 Intensity Levels + OFF
Projection Brightness:
Programmable Snooze Duration:
5 to 120 Minutes
Dimensions:
21.31cm Lx11.98cm Wx12.34cm H
(8.39in Lx4.72in Wx4.86in H)
The CR2032 Battery will
Settings Backup:
save Time and Alarm Settings when power is lost.
Projection will not show.
Charging:
5 Watts
Wireless Charger Power Output:
1 Amp
USB "A" and "C" Charging Port:
Maximum Current (Charging Cords Not Included)
Outdoor Sensor TX141TH-Bv3
Outdoor Temperature Range:
-40°C to 60°C (-40°F to 140°F)
10% to 99% RH
Outdoor Humidity Range:
Transmission Range:
Over 100 meters (330 feet)
in open air RF 433MHz
Power Requirement:
2 "AA" LR6 Batteries
(included)
Battery Life:
Over 24 months with reputable
batteries
Dimensions:
3.98cm L x 2.0cm W x 13.0cm H
(1.57" L x 0.79" W x 5.11" H)
This product operates on alkaline batteries.
However, it is suggested to use lithium batteries
in areas where the temperatures is consistently
below -30°C (-22°F)
APPENDIX
Button Cell Battery
Replace the Coin Cell Battery
1.
Use a coin to turn the battery cover to the left to remove it.
2.
Pull back the metal pin and gently remove the battery.
3.
Insert a fresh CR2032 battery with the
into place.
4.
Replace the battery cover and use the coin to turn it to the
right to lock.
Battery replacement instruction:
When batteries of different brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a difference of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
• Always purchase the correct size and grade of battery
most suitable for the intended use.
• Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
different types.
• Clean the battery contacts and those of the device
prior to battery installation.
• Ensure the batteries are installed correctly with regard
to polarity (+ and -).
• Remove batteries from product during periods of non-
use. Battery leakage can cause corrosion and damage
to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect
the environment please check the internet or your local
phone directory for local recycling centers and/ or
follow local government regulations.
17
WARNING
1.
This product contains a button battery.
+
side up and snap
2.
If swallowed, it could cause severe injury or death in
just 2 hours.
3.
Seek medical attention immediately.
WARNING:
KEEP BATTERIES OUT OF REACH OF CHILDREN
1.
Swallowing may lead to serious injury in as little as 2 hours
or death, due to chemical burns and potential perforation
of the esophagus.
2.
If you suspect your child has swallowed or inserted a
button battery, immediately seek urgent medical assistance.
3.
Examine devices and make sure the battery compartment
is correctly secured, e.g. that the screw or other mechanical
fastener is tightened.
4.
Do not use if compartment is not secure.
5.
Dispose of used button batteries immediately and safely.
Flat batteries can still be dangerous.
6.
Tell others about the risk associated with button batteries
and how to keep their children safe.
18

Publicité

loading

Ce manuel est également adapté pour:

Ca74962