Publicité
Les langues disponibles
Les langues disponibles
SURFACE MOUNTING BOX
A detachable mounting box allows the unit to be mounted as a surface
•
installation. If desired you can purchase the optional mounting box for surface
installation by ordering part no. 31128 black or 36689 white part.
Mounting box is attached to the surface location were the alarm is to be
•
mounted with two screws see instructions below.
To remove cover flange from alarm insert a flat blade screw driver into the
•
middle of the slot at the top of the flange and pry down to lift the flange off the
alarm.
To install the mounting box to the alarm place the alarm inside the box and
•
fasten in place with the four screws provided.
Reinstall the cover flange by placing the flange against the alarm and
•
snapping it into place.
All manuals and user guides at all-guides.com
16
Publicité
