Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS
Canada
a
INSTALLATION AND SERVICE MUST BE PERFORMED
BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ns UES]
FOR YOUR SAFETY: Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance.
United States
GENERAL INFORMATION
The Warm
& Serve Drawer can be used:
¢ Asa stand alone appliance
¢ As acombination 27" or 30" Warm & Serve Drawer with
a 27" or 30" (76 cm) built-in oven mounted above.
IMPORTANT:
The warmer drawer must be
installed on a surface that is leveled from
left to right, rear to front, and is capable
of supporting 100lbs (45 Kg).
floor 42"
oo"
Minimum
distance to ~.
Warm
& Serve
Drawer
Dimensions
NOTE: A 60" (152 cm) long cable is supplied with
IMPORTANT:
The Warm & Serve Drawer runs off a
the Warm & Serve Drawer.
Stand Alone
Installation
" (152 cm) Cord
W
®Warm
& Serve Drawer
s
J Warm & Serve Cutout
single phase three-wire 120 volt, 60 hertz, AC only
electrical supply with ground.
Combination Warm & Serve Drawer/
27" or 30" (76 cm) Built-in Oven Installation
CAUTION: Install two 3" (7.6 cm)
wide x 3.4" (1.9 em) thick planks
capable of supporting 200 Ibs —
_
(90.7 Kg)
29 1/16"
(74,9 cm)
~~ —J**
H* = 11-7/8" (30,2 cm) Min. is the
|
space bolwwes the bottom of the warmer drawer cutout and
the bottom of the oven cutout. This is a critical dimension
and must be provided.
J** = 3" (7.6 cm) Max. Electrical Junction Box for wall oven
must be lower than warmer drawer cutout.
A. HEIGHT
8. WIDTH
Cc. DEPTH
A. HEIGHT |
B. WIDTH
Cc. DEPTH
27" Models
11s" (28.6 cm) | 27" (68.6 cm) | 23 3/8" (59.4 cm) |] 27" Models | 1114" (28.6.cm) |
27" (68.6 cm}
23 3/8" (59.4 cm}
30" Models
11s" (28.6 cm) | 30" (76.2 cm) | 23 3/8" (59.4 cm) |} 30" Models | 114" (28.6. cm) |
30" (76.2 cm)
23 3/8" (59.4 cm}
DB. CUTOUT..|
E. CUTOUT
E. CUTOUT
D. CUTOUT.|
E. CUTOUT.)
E. CUTOUT
G.
HEIGHT
WIDTH
DEPTH
HEIGHT
WIDTH
DEPTH
HEIGHT
27" Models
Min. | 9 7/8" (25.1 cm) | 2542" (64.8 cm) | 23 5/8" (60cm)
27"
= Min. | 97/8" (25.1 cm) | 25%" (64.8 cm) | 23 5/8" (60cm) | 2" (5.1 cr)
Max. | 1014" (26 em) | 2534" (65.4 cm) |
2.4" (61 em)
Max. | 1044" (26 cm) | 2534" (65.4cm) |
24" (61 cm)
Depends
30" Models.
Min. | 9 7/8" (25.1 cm) | 2844" (72.4 cm) ] 23.5/8" (60cm) |] 30"
Min. | 9 7/8" (25.1 em) | 2814" (72.4 cm) | 23 5/8" (60cm)
cn entice!
Max. | 1014" (26 em) | 28%" (73m) |
24" (61 cm)
Max. | 10%" (26cm) | 28%"(73.cm) |
24" (61 em)
H
Printed in the USA
P/N 318201823 (1004) Rev. A

Publicité

loading

Produits Connexes pour Kenmore Pro 79046913510

Ce manuel est également adapté pour:

Pro 79046913511