SSS Siedle A 180-10 Information Produit page 4

English
Application
Siedle Axiom Gateway, the video
indoor station with 7" touchscreen
for the Smart Gateway.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Note
• For use only in dry indoor atmos-
pheres.
Scope of supply
• A 180-10 Siedle Axiom Gateway
• Wall mounting plate
• RJ45 socket
• 4-pin screw-type terminal
• This product information
For download
• Operating instructions for the end
customer
Terminal assignment
RJ45 LAN
3,4 = GND, ERT Storey call button
Mounting
1 Recommended mounting height
appr. 1.60 m to display height/
viewing height.
The centre of the display sits 21 mm
above the centre of the double-
device junction box: so with a height
of 1600 mm, the centre of the box
must be set to 1579 mm.
4
2 Wire up the provided RJ45 socket
according to the instructions and
snap into the wall mounting plate
from behind.
Wire up the 4-pin screw-type ter-
minal and snap it in.
3 When mounting directly on the
wall, fasten the base plate using
4 screws, paying attention that
the plate is the right way up (top
marking). Double device junction
box with an installation depth of at
least 47 mm required.
4 When mounting on a switch box,
use the screw openings in the centre
of the device, paying attention that
the plate is the right way up (top
marking). Double device junction
box with an installation depth of at
least 47 mm required.
5 Snap the panel onto the wall
mounting plate.
Installation and commissioning
The commissioning instructions
for the Smart Gateway, the system
manuals for the In-Home bus and
the operating instructions for the
Siedle Axiom can be found in the
download area.
Video memory
Images are stored centrally on the
Smart Gateway.
Similar to photographs, saved
images are subject to copyright.
Integrate external IP camera
Siedle Axiom supports the call up of
MJPEG via HTTP stream.
Other codecs and reception types
are not supported.
A frame-call up cannot be config-
ured.
There is no predetermined limitation
for resolution and frame rate. The
received MJPEG data is automatically
scaled to the viewing area.
Should performance issues arise, the
resolution and/or frame rate must be
reduced in the camera settings.
Display issues can be resolved by
reducing the frame rate and resolu-
tion in the camera settings.
Care instructions
Only ever clean your indoor device
using a soft cloth dampened with
mild soap solution. Dry, aggres-
sive cleaning agents and abrasive
detergents can damage the surface.
Detailed care instructions are located
in the download area of
www.siedle.com.
Specifications
Operating voltage: PoE in accord-
ance with 802.3af (PoE class 3)
Ambient temperature:
+5 °C to +40 °C
Dimensions (mm) W x H x D:
185 x 144 x 18