HONEY JOY TQ10122 Instructions De Montage page 6

honey joy
Put the gasket, front wheel, gasket and nut into the front
axle in turn.
Fix the nut with the spanner, and then fix the wheel cap on
the wheel.
Insert the rear axle into the rear axle mounting. Then insert the
gearbox into the rear axle. (pay attention to the left and right)
Put the rear wheel, gasket and nut into the rear axle in turn.
Fix the nut with the spanner, and then fix the wheel cap on the
wheel.
10
Use the provided
M10 spanner to
tighten the nuts.
Clip the fuel tank decoration into the body according to the
direction shown in the figure. Fix it with screws.
x2
honey joy
11