Costway EP25436 Mode D'emploi page 6

Installing Cord Hook
Step 1
• Insert the cord hook (E) into the air vents (G) matching up with the
holes for the screws.
Step 2
• Tighten the screws until cord hook (E) is secure.
NOTICE! Cord hook (E) can be installed on either side of the
product air vents (G).
Operation
Positioning the product
• Place the product on a flat and stable surface to avoid risk of
tipping it over.
Connecting
• Fully unwind the power cord (F) and connect the plug to a suitable
socket outlet.
NOTICE! Once connected to the socket outlet, the power indicator
(D) stays lit.
NOTICE! The power indicator light (D) stays lit even once the
product has been turned OFF.
Switching on/off
• To switch on the product, turn the power knob (B) clockwise until
the desired level of power level has been selected.
• To switch off the product, turn the power knob (B) anti-clockwise
until OFF has been selected.
10
Temperature setting
1. To adjust the temperature, turn the thermostat knob (C) clockwise
from MIN to MAX and rotate the power knob (B) clockwise to
choose one of below settings:
Setting Power
I 600 W
II 900 W
III 1500 W
2. When the desired temperature is reached, rotate the thermostat
knob (C) anti-clockwise until the click sound. The product cycles
automatically to maintain the set temperature.
NOTICE! The product gradually heats up once the desired power
level and temperature has been selected.
Cleaning and Maintenance
! WARNING ! Risk of electric shock
• To prevent electric shock, unplug the product before cleaning.
! WARNING ! Risk of electric shock
• During cleaning do not immerse the product in water or other
liquids. Never hold the product under running water.
Cleaning
• To clean the product, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers,
metal or sharp utensils to clean the product.
Heat
Low
Medium
High
11