Publicité
Les langues disponibles
Les langues disponibles
EN
2.3. PERSONAL SAFETY
a)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
b)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
c)
Do not wear loose clothing or jewellery. Keep hair,
clothes away from moving parts. Loose clothing,
jewellery or long hair may get caught in moving parts.
d)
Remove all adjusting tools or spanners before turning
the device on. A tool or spanner left in the revolving
part of the device may cause injury.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
f)
Do not put your hands or other items inside the
device while it is in use!
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply before
commencement of cleaning and maintenance. Such
a preventive measure reduces the risk of accidental
activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
i)
Do not move, adjust or rotate the device in the course
of work.
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to prevent stubborn grime
from accumulating.
l)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
m)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n)
Keep the device away from sources of fire and heat.
8
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed to circulate air in the room.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. PRODUCT OVERVIEW
1
3
4
5
2
6
7
1.
Fan speed switch
2.
Tilt adjustment
3.
Oscillation switch (applies to the MSW-FFF-02 device)
4.
Fan blades
5.
Safety grill
6.
Height adjustment
7.
Base
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device is
being used. There should be at least 10 cm distance between
each side of the device and the wall or other objects. Keep
the product away from hot surfaces. The device should
always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children
and persons with limited mental and sensory functions.
Position the device such that you always have access to the
power plug. The power cord connected to the appliance
must be properly grounded and correspond to the technical
details on the product label.
Rev. 18.10.2022
ASSEMBLING THE APPLIANCE
5
6
1
2
3
4
7
19
11
20
21
12
13
14
16
18
1.
Front safety grill
2.
Fan blades
3.
Blade locking screw
4.
Screws fastening the rear safety grill
5.
Rear safety grill
6.
Motor shaft
7.
Motor housing
8.
Oscillation switch (applies to the MSW-FFF-02 device).
9.
Fan speed switch
10.
Power cord
11.
Tilt adjustment screw
12.
Inner tube
13.
Height adjustment knob
14.
Outer tube
15.
Base
16.
Stabilizing plate
17.
Washer
18.
Locking screw (L-shaped)
19.
Tilt adjustment screw
20.
Tilt locking screw
21.
Locking screw with nut
2
1
3
4
Rev. 18.10.2022
EN
3.3. DEVICE USE
1.
Connect the device to a power socket.
2.
To set the desired tilt angle, loosen the tilt adjustment
screw and - using the tilt lock knob - set the fan to the
8
desired position, then tighten the tilt lock knob.
9
3.
Set the desired speed:
•
0 - fan turned off
10
•
I - low speed
•
II - average speed
•
III - high speed
4.
To turn on the oscillation function, press the oscillation
switch. To turn off the oscillation function, pull the
oscillation switch up (applies to the MSW-FFF-02
device).
5.
After using the fan, set the speed to "0" and disconnect
the device from the power socket.
15
3.4. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories. Wait for the rotating
17
elements to stop.
b)
Use only non-corrosive cleaners to clean the surface.
c)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d)
Do not spray the device with a water jet or submerge
it in water.
e)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
f)
Use a soft, damp cloth for cleaning.
g)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
h)
Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with their
markings. By choosing to recycle you are making a significant
contribution to the protection of our environment.
Contact local authorities for information on your local
recycling facility.
9
Publicité
