Télécharger Imprimer la page

BlissLights Velarus Guide De L'utilisateur page 4

Veuillez utiliser uniquement le câble usb fourni par le fabricant.

Publicité

Les langues disponibles
  • FR

Les langues disponibles

NOTICE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the
following. Read all instructions before using (this furnishing).
DANGER – To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1.
The light source contained in this luminaire shall only be replaced by the manufacturer or a
service agent or a similar qualified person.
2.
Use a USB power source/driver with low voltage(SELV) output with a constant voltage of 5V, input
current not more than 1A, according to lEC/EN/AS 61347-2-13.
3.
Unplug from outlet before putting on or taking off parts.
4.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or
disabled persons.
5.
Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
6.
Never operate this furnishing if it has a damaged USB Wall Adapter, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the furnishing to a service center
for examination and repair.
7.
Keep the cord away from heated surfaces.
8.
Never operate the furnishing with the air openings blocked. Keep the air openings free of lint,
hair, and the like.
9.
Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
12. To disconnect, turn all controls to the off position, then remove plug from outlet.
1

Publicité

loading

Produits Connexes pour BlissLights Velarus

Ce manuel est également adapté pour:

Led-rcwb-velarusVelarus led-rcwb-velarus