Publicité
Les langues disponibles
Les langues disponibles
CONNECTING THE UCM6510:
T1/E1/J1 Port
USB Port
SD Card Slot
2x FXS Port
2x FXO Port
2x DC 12V Power Jack
Basic connections for intial setup:
1. Connect one end of a straight through RJ45 Ethernet cable into the WAN port
of the UCM6510; connect the other end into the uplink port of an Ethernet
switch/hub.
2. Connect the 12V DC power adapter into the DC 12V power jack 1 on the
back of the UCM6510. Insert the main plug of the power adapter into a surge-
protected power outlet. (Connect the second power adapter into the DC 12V
power jack 2 for failover purpose in case the first one is down).
3. Wait for the UCM6510 to boot up. The front LCD display will show the UCM's
hardware information when the boot process is completed.
4. Once the UCM6510 is successfully connected to the network via WAN port,
the Network LED indicator will be lit green, and an IP address will be shown
on the LCD display.
Optional connections depending on how the UCM6510 is used:
1. PSTN Connection: connect PSTN lines from the wall jack to the UCM6510
ports FXO ports.
2. Analog Line Connection: connect analog devices (phone and fax) to FXS ports.
3. T1/E1/J1 Line Connection: connect one end of the T1/E1/J1 cable provided
from the service provider into the T1/E1/J1 port of the UCM6510; connect the
other end into the T1/E1/J1 wall jack.
Navigation Keys
LED Indicators
LCD
Ground
Reset
LAN Port
WAN Port
Heartbeat
Port
~ 3 ~
USING THE UCM6510 KEYPAD MENU:
1. Press "OK" key to start browsing menu options.
2. Press "Down" to browser different menu options. Press "OK" to select an entry.
3. In the menu option, select "Back" to go back to previous menu.
4. The LCD will return to default display after being idle in menu for longer than
15 seconds.
CONFIGURING THE UCM6510 VIA WEB GUI:
1. Connect the computer to the same network as the UCM6510.
2. Ensure the UCM6510 is properly powered on and displays the IP address on
the LCD screen.
3. Open a web browser on the computer and enter the displayed IP address into
the search bar in the following format: http(s)://ipaddress:portnumber
4. The web portal should be shown (see figure below). Enter the default admin-
istrator credentials:
•
Username: admin
•
Password: admin
NOTE: Units manufactured from January 2017 onwards have unique default
passwords printed on their stickers. Older units have "admin" as the default
password.
5. For more detailed information on how to configure SIP extensions, PSTN con-
nections, SIP trunks, and other system settings via the web UI, please down-
load the UCM6510 user manual here: http://www.grandstream.com/support/
~ 4 ~
Publicité
