Garland 1211 TG Manuel D'instructions page 44

English
CE DECLARATION OF CONFORMITY
Who has signed below, Lisardo Carballal , authorised by Productos McLand S.L., with the following address C/
La Fragua 22, 28933, Móstoles, España , declares that the products brand Garland models Auger 1211TG-V20
with serial number of year 2019 on (the year of manufacture is clearly indicated on the tool identification plate,
followed the serial number) and whose function is "A machine which is used for drilling holes by rotary drilling",
comply with all the requirements stated by the Directive 2006/42/EC of the European Parliament and of the
Council of 17 May 2006 on machinery, and amending Directive 95/16/EC
These tools also comply with the requirements of the following community directives:
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation
of the laws of the Member States relating to the noise emission in the environment by equipment for use
outdoors
• COMMISSION DELEGATED REGULATION (EU) 2018/989 of 18 May 2018 amending and correcting
Delegated Regulation (EU) 2017/654 supplementing Regulation (EU) 2016/1628 of the European Parliament
and of the Council with regard to technical and general requirements relating to emission limits and type-
approval for internal combustion engines for non-road mobile machinery
Power (kW)= 1,9
Measured sound power level dB(A) ≤115
Guaranteed sound power level dB(A) ≤115
44/132
Lisardo Carballal
Product Manager
Móstoles 28-10-2019