stayer BL50CK Instructions D'emploi page 9

BL50K/BL50BK/BL50CK
SCREWDRIVER WITH LITHIUM BATTERY
Technical data
Battery charger Voltage and
Frequency:
Voltage:
No load speed:
Bit size:
Battery type:
Charger current:
Charge time:
Read the following instructions and precautions before
using this product. Store this manual in a safe place.
User instructions
Range of use: Doing up an undoing screw. Use
machine, changing unit and accessories (follow maker's
specifications) only for the specified range of applications!
All other applications are expressly excluded.
Safety instructions
- Do not use machines, attachments and chargers for
works other than those for which they are designed for.
- Before drilling holes or screwing into a wall, in case of
doubt check with a metal-/voltage detector that you are
not breaking into an electricity, gas or water supply line.
- Before you lay down the drill/screwdriver, make sure that
all moving parts have come to a stop.
- Avoid frequent stalling when screwing or drilling, as it
could damage the batteries.
- Only connect the charging device to a 230 V AC supply.
- Charge the screwdriver battery only with the appropriate
charging device.
- The charging device and the screwdriver must be
protected from moisture.
- Do not use the charging device in the open.
- Never expose batteries to temperatures above 50 °C.
- Warning: Do not short out the contacts of battery or
charger.
- Respect the polarity "+/-" when charging.
- Do not throw batteries in fire.
Charging
The battery-operated screwdriver has not been fully
charged at works. Before using for the first time charge
the screwdriver unit for 3-5 hours. To do this insert the
charger plug (5) into the charging socket (4) and connect
the charging. unit (6) to a power supply. The battery (9) is
charged in the screwdriver.
Lithium battery
Always chargeable. No memory effect. No self discharge.
Care!
Do not exceed the maximum charging time of 8 hours, as
there is a risk of overheating!
Reccomendation
Connect the unit up to a time switch.
CORDLESS
230 V 50 - 60 Hz 120 V 60 Hz
3,6 V 3,6 V
200 rpm 200 rpm
1/4" 1/4"
3,6 V Lithium 3,6 V Lithium
300 mAh 300 mAh
3-5 hours 3-5 hours
ENGLISH
9
Operation
Insert the screwdriver bit into the bit holder (3) as far as the
stop. If standard bits or socket-head bits are used, use an
additional bit holder. Before switching on the screwdriver
unit locate the screwdriver bit firmly on the screw and
switch on the unit to rotate in the desired direction (1),
push the Forward/Reverse Switch (1) to operate the
screwdriver.
Angle adjustment
The screwdriver has 2 angle position adjustment, press
the lock switch (11) to get the appropriate angle position
you need, the hinge allows the screwdriver handle to be
angled for better power transmission.
Battery power indicator
The screwdriver has a battery indicator, it is very easy to
show the battery capacity, only need to press the button
(8) when you want to check it, green/yellow/red light
showed the battery power full or low.
Light
The screwdriver has a light, switch on the light switch (7)
to lighten the place where you will drill or screw, push the
switch (7) to turn on the light.
BL50B/BL50C
To turn the flashlight 14, click on the same flashlight 14.
Manual operation
The screwdriver has automatic spindle lock function. This
setting enables tight screw to be turned manually.
Adjusting the torque setting, helps you in screwing
operations (8+1 positions)
- To exclude the torque regulation adjust the ring (13) on
the symbol
- To screw: adjust on the positions from 1 to 8 in
correspondece of the finger put on the case of the
screwdirver. In position 1 there is the lower torque, in
position 8 there is the max. torque. Start screwing operation
with a lower torque, then increase it until reaching the
necessary torque.
Care and maintenance
Clean the housing only with a damp cloth - do not use
any solvents! Dry thoroughly afterwards.In order to
maintain battery capacity, we recommend the battery to
be completely discharged every 2 months and recharged
again. Only store full charged batteries and top-up the
charge from time to time.They should be stored in a dry
and frost-free place, the ambient temperature should not
exceed 50 °C.
Important: Protect environements
Do not throw used NC batteries into fire or water-danger
of explosion! Hand in used and faulty batteries to your
local waste disposal.
Service hints
Store the machine, operating instructions and where
necessary the accessories in the original packaging.
9