Publicité
Les langues disponibles
Les langues disponibles
2
Recording a measuring curve
1.
Select a receiver via "Receiver address".
2.
Select the desired mode via the selection list in the top centre of RF recorder.
3.
Define the desired time frame/frequency range for your recording via the "Scaling" button.
4.
Select the desired recording type in the selection list on the right-hand side of the RF recorder.
5.
Start the recording via the "Start" button.
You can follow the recording of the measuring curve in the recording window. If you wish to terminate
the recording, use the "Stop" button. The recording is then stopped and you can analyze the data.
NOTE
If you terminate the RF recorder during recording, all recorded data are lost.
74
All manuals and user guides at all-guides.com
Publicité
