Sennheiser S-MCD 3000 HP Notice D'emploi page 52

All manuals and user guides at all-guides.com
4 Specifying the ports
When starting the program, you can select the serial ports you wish to use from the following list.
NOTE
If it is not absolutely necessary to use all ports, you should start at COM 3. It is then necessary to
deactivate COM 1 and COM 2 in the set-up of your computer, as there can otherwise be problems of
responsibility.
NOTE
Please note that you can only use a maximum of 8 ports for SMCD. The 9th port is available for other
peripherals.
52