Publicité
All manuals and user guides at all-guides.com
Chapter 3
Installation
3.1 Precautions
To ensure a long-term and stable performance of the Switch, please pay
attention to the following before the installation.
1) Safety Requirements
• Before cleaning the Switch, cut off the power supply. Do not clean it by
the waterish cloth, and never use any other liquid cleaning method.
• Take waterproof measures during storage, transportation and
operation of the equipment.
• Use only the power cord provided with the Switch.
• Make sure the voltage of the power supply meets the requirement of
the input voltage of the Switch.
• Do not push any objects into the openings of the Switch.
• Ensure the vent hole is well ventilated and unblocked.
• Do not open or remove the cover of the Switch.
2) Location Requirements
When you choose a location for the Switch, please follow these guidelines:
• Install the Switch on a flat and stable surface that can support the
entire weight of the Switch with all fittings.
• Locate the Switch far from strong electromagnetic field generators
(such as motors), vibration, dust, and direct exposure to sunlight.
• To ensure adequate air flow around the Switch. At least 10 cm (4
inches) of space at the front and rear of the Switch is needed for
ventilation.
• Make sure that the Switch will be accessible and that the cables can
be easily connected.
• Position the Switch away from water and moisture sources, be sure to
provide
an
environment.
acceptable
temperature
8
and
humidity
operating
Publicité
