ACERBIS X-WAY Mode D'emploi page 22

EN
HOW TO REMOVE
Remove the visor by unclipping it
through a special support.
HOW TO REMOVE FROM THE BACK
Remove the back by sliding o the
back.
HOW TO ASSEMBLE FROM THE FRONT
Insert the plastic part into the
designated slots along the plastic
frame.
21
6.1 INSTRUCTIONS TO THE TRANSPARENT VISOR
6.2 INNER LINING INSTRUCTIONS
HOW TO INSTALL
Attach the visor using the special
support.
HOW TO REMOVE FROM THE FRONT
Remove the front by gently releasing
the inside along the frame. To facilitate
the operation, start from the side of the
frame.
HOW TO ASSEMBLE FROM THE BACK
Insert the headset into the back of the
helmet and fasten the buttons.