Publicité
Les langues disponibles
Les langues disponibles
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping while operating. And make sure
that the structure to which you are attaching the unit is secure and is able to support a
weight of 10 times of the unit's weight. Also always use a safety cable that can hold
12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where
is out of the touch of people and has no one pass by or under it.
Under " Control Mode", for installations where the DMX cable has to run a long
distance or is in an electrically noisy environment, it is recommended to use a DMX
terminator. This helps in preventing corruption of the digital control signal by electrical
noise. The DMX terminator is simply an XLR plug with a 120 resistor connected
between pins 2 and 3, which is then plugged into the output XLR socket of the last
fixture in the chain.
3. Technical Specifications
Voltage: AC 100V~240V, 50/60Hz
Power Consumption: 350W Max.
LED: 7pcs x 40W RGBW 4in1 LED
Beam Angle: 3 ~60 degree
Movement: Pan 540°, Tilt 270°, speed adjustable.
Motor: 2-phase motor
Dimming: 0-100% electronic dimming
Strobe: 1-20times per second
DMX Channel: 17/45CH
Operation Modes: DMX512, Master/Slave, Auto, Sound active
Color: RGBW infinite mixing system, Uniform and bright colors
Effects: PIXEL LED control, rainbow effects, outstanding color macro effect.
CTO : 2800 – 8500K
Display: Colorful LCD display for easy navigation.
Packing Size: 410 x 260 x 365mm
N.G/W: 6kg/7.2kg
4
Publicité
