Topcom KIDZZZ TRAVEL BOTTLE WARMER 100 Manuel D'utilisateur page 3

TOPCOM Travel Bottle Warmer 100
1 INTRODUCTION
Thank you for purchasing the Travel Bottle Warmer 100. We hope you
will enjoy using the device and the benefits it offers.
2 SAFETY NOTES
• This product is not a toy. Install or store it out of the children's
reach.
• Over heating may damage the baby bottle. Check the temperature
every 10 minutes. Do not heat longer than necessary.
• Unplug the device when heating is finished.
• Always check the temperature before feeding your baby.
• Don't heat the bottle too long to keep the food always fresh.
• If the unit is damaged, don't repair it or replace any part in the unit
yourself. Don't dismantle the unit.
• Do not put the device in a washing machine, otherwise the elec-
tronic parts will be damaged.
3 OPERATION
• Open the bag.
• Remove the heating band.
• Wrap the heating band around
the baby bottle tight by squeez-
ing the clip.
The thermic bag can also be used
to keep your baby bottle cool
during travel.
• Remove the cigarette plug
charger from the back of the
unit.
• Plug the cigarette charger into
the car lighter outlet. The power
indicator will light on.
• The heating of a 200 ml bottle
takes about 20 to 30 minutes.
The heating rate is about 1°C/
minute for 200ml liquid.
• Check the temperature before
feeding.
4 CARE AND MAINTENANCE
Disconnect the warmer from the cigarette lighter socket and allow it to
cool down.
Wipe the Bottle warmer with a damp cloth.
Never submerge in water. It can cause severe damage to the warmer.
5 TECHNICAL SPECIFICATIONS
Power supply (car cigarette charger): 12V DC
Power consumption: 25 Watts
Operation condition: +7°C ~+45°C
Please read this manual carefully before use.
Put the user guide away in a safe place for
future reference.