magnetic 289121 Mode D'emploi page 3

The Magnetic Airbrush system • 289000
The Magnetic system consists of a compressor for compressed air and an easy to
work airbrush gun. The system works on gravity; the paint goes in the container on
top in the gun, will be mixed with air and can be sprayed. The advantage of this
system is that you can spray extreme fi ne lines using low pressure. The advantage
of this low pressure system is that you can move your hand easily and keep having
control over the gun. Also this system allows you to change your paint easily.
Specifi cations
Voltage: 220-240 Volt
Watt: 110 W
Maximum pressure: 45 PSI
1. On/Off Switch
2. Steel plate cover to protect the machine.
3. Plug
4. Airbrush Holder
5. Pressure adjustment knob
6. Aibrush Holder 1
7. Pressure gauge
8. Air outlet
A. Handle A. Handle
B. Steel plate cover B. Steel plate cover
4.
C. Air hose C. Air hose
5.
6.
7.
8.
3.
C.
B.
All manuals and user guides at all-guides.com
Using the compressor
Before you start to work plug the compressor into a grounded outlet (3). You
will fi nd a rotary button on the compressor with a plus and minus (5). Turn
the button to plus. The pressure of the compressor has to be between two
and three bar. On the side there is an on and off button. Tighten the thick
black cable (air hose) to the compressor. Tighten the other side of the cable to
the water tank at the starting point of the arrow. The watertank fi lters excess
fl uid from the air, to keep water from entering the gun. If there is water left
in the water tank you can empty the container on the bottom while there is
still pressure on the compressor. Attach the table clamb to the table and place
the water tank. Connect the small black cord to the orther side of the arrow
of the water tank. Connect the other end of the small black cord to the gun.
Overheating
The compressor is equipped with heat sensors. If the machine gets overheated
or the voltage is to low, the machine will stop automatically. We advice you not
to use the machine longer than one hour in a row. Let the machine cool off fi rst.
Precautions
• Work safe and responsably.
• Do not touch the machine while working, the engine can be hot.
• Use a safe, approved airbrush gun.
• Do not point the gun towards a face or cavities.
• Use the machine in a dry, ventilated space with a temprature between 0 and
40 degrees Celcius with an average humidity varying between 20 to 80%
(no condensation). Never use the machine in a wet or humid place. Moisture
can cause short circuiting, fi re or rust. It also can make the isolation weak.
1.
• Please make sure the cord and the plug are not damaged to prevent current
leakage, shocks or fi re. Always check the cords and cables before starting
2. the machine. Let your broken cord be repared by a professional.
• Use the machine in a clean, tidy place to avoid tripping over cords.
A. • Avoid contact with fl ammable materials like water, oil and other liquids.
• Keep the machine out of reach of children.
• Never change anything to the machine that could affect the original
functionality or safety.
Maintenance
• Remove dust or dirt with a brush or soft cloth after use. After that use a
moist towel. Dry off with a duster.
• Periodical inspection is recommended every 1 or 2 years for safe and
effi cient use. Please consult your service supplier.
Terms & conditions
Advice
Take an Airbrushing course at your local Magnetic Nail Academy. There you will
learn how to work quick and be creative. During the course you will also get
advice on how to maintain compressor and gun.
Warranty
Magnetic offers a two year warranty on the electric equipment. During this time
Magnetic repairs or replaces the product for free, if you can show the proof
of purchase and the warranty certifi cate. Read – for you own safety – the
following conditions regarding the warranty of your electric equipment. In case
of malfunction and claim, fi rst contact the local Magnetic distribution centre
you bought the machine at.
Limited warranty
Warranty covers manufacturer defects only and only if the instructions for
use were followed. This airbrush system is designed for use in the application
of artifi cial nails. It's use is restricted to professional, skilled nail technicians.
Magnetic takes no responsibility if the machine is operated by unskilled persons
The following conditions void warranty after:
• using oil or grease on compressor;
• servicing or dissembling the machine by any other person than employees of
the Magnetic Nail Academy;
• dropping or excessive shock to gun or compressor;
• immersing the compressor in any type of sterilizing or cleaning solution;
• Returned goods which were damaged by insuffi cient packing, are the
responsibility of the sender.
• This warranty does not affect your legal rights.
We value your opinion. If you have questions or remarks about Magnetic-
products, please visit us at www.magneticnaildesign.com.
GB