GB
The Magnetic Airbrush system • 289121
The Magnetic system consists of a compressor for compressed air and an easy to
work airbrush gun. The system works on gravity; the paint goes in the container
on top of the gun, will be mixed with air and can be sprayed. The advantage
of this system is that you can spray extreme fi ne lines using low pressure. The
advantage of this low pressure system is that you can move your hand easily
and keep having control over the gun. Also this system allows you to change
your paint easily.
Specifi cations
Voltage:
220-240 Volt
Watt:
110 W
Maximum pressure: 45 PSI
2.
1. On/off Switch
1.
2. Handle
3. Pressure gauge
4. Moisture trap
5. Plate cover
6. Air hose
5.
The assembling of the new compressor
1. Turn the water container on the front.
2. Turn the airhose on the moisture trap.
3. Connect the cable to the gun.
4. Pull up the black button of the moisture trap en turn to plus or minus to fi nd
the correct bar (between 2-3). Push the button down.
All manuals and user guides at all-guides.com
Using the Compressor
Before you start to work plug the compressor into a grounded outlet. The on/off
switch is placed on top of the compressor. The pressure of the compressor has to
be between two and three bar.
The moisture trap fi lters excess fl uid from the air to prevent the water is not
going to the gun and paint. If there is water left in the water tank you can empty
the container on the bottom while there is still pressure on the compressor.
Precautions
• Work safe and responsably.
• Do not touch the machine while working, the engine can be hot.
• Use a safe, approved airbrush gun.
• Do not point the gun towards a face or cavities.
• Use the machine in a dry, ventilated space with a temprature between 0 and
40 degrees Celcius with an average humidity varying between 20 to 80%
(no condensation). Never use the machine in a wet or humid place. Moisture
3.
can cause short circuiting, fi re or rust. It also can make the isolation weak.
• Please make sure the cord and the plug are not damaged to prevent current
6.
leakage, shocks or fi re. Always check the cords and cables before starting
the machine. Let your broken cord be repared by a professional.
• Use the machine in a clean, tidy place to avoid tripping over cords.
• Avoid contact with fl ammable materials like water, oil and other liquids.
• Keep the machine out of reach of children.
4.
• Never change anything to the machine that could affect the original
functionality or safety.
Maintenance
• Remove dust or dirt with a brush or soft cloth after use. After that use a
moist towel. Dry off with a duster.
• Periodical inspection is recommended every 1 or 2 years for safe and
effi cient use. Please consult your service supplier.
Terms & conditions
Advice
• Take an Airbrushing course at your local Magnetic Nail Academy. There you
will learn how to work quick and be creative. During the course you will also
get advice on how to maintain compressor and gun.
Warranty
Magnetic offers a two year warranty on the electric equipment. During
this time Magnetic repairs or replaces the product for free, if you can
show the proof of purchase and the warranty certifi cate. Read – for you
own safety – the following conditions regarding the warranty of your
electric equipment. In case of malfunction and claim, fi rst contact the
local Magnetic distribution centre you bought the machine at.
Limited warranty
Warranty covers manufacturer defects only and only if the instructions for
use were followed. This airbrush system is designed for use in the application
of artifi cial nails. It's use is restricted to professional, skilled nail technicians.
Magnetic takes no responsibility if the machine is operated by unskilled persons
The following conditions void warranty after:
• using oil or grease on compressor;
• servicing or dissembling the machine by any other person than employees of
the Magnetic Nail Academy;
• dropping or excessive shock to gun or compressor;
• immersing the compressor in any type of sterilizing or cleaning solution;
• Returned goods which were damaged by insuffi cient packing, are the
responsibility of the sender.
• This warranty does not affect your legal rights.
We value your opinion. If you have questions or remarks about Magnetic-
products, please visit us at www.magneticnaildesign.com