Publicité
Les langues disponibles
Les langues disponibles
3. If needed, set tractor 3-Point lift height to keep driveline from exceeding the
maximum allowable length and 25°up.
3.2. Operating Instructions
Pre-Start Checklist
Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training involved in the operation, transport,
storage, and maintenance of the mower. Therefore, it is absolutely essential that
no one operates the machine without first having read, fully understood, and
become totally familiar with the Operator's Manual. Make sure the operator has
read and paid particular attention to:
• Usage safety
• Assembly & Set-up
• Operating Instructions
• Adjustments
• Maintenance & Lubrication
Make sure the operator has completed the Operating Checklist below.
Check
Read and follow all safety information carefully.
Refer to "Usage safety".
Make sure all guards and shields are in place.
Refer to "Usage safety".
Read and follow 3-Point hook-up & preparation instructions.
Refer to "Assembly & Set-up".
Read and made all required adjustments.
Refer to "Adjustments".
Read and follow all operating procedures.
Refer to "Operating Instructions".
Read and follow all Maintenance Instructions.
Refer to "Maintenance & Lubrication".
Read and follow all Lubrication Instructions.
Refer to "Lubrication Points".
Make sure all gearboxes are properly lubricated.
Refer to "Gearbox Lubrication"
Check mower initially and periodically for loose bolts and pins.
Be sure all lock nuts and bolts are tight. Especially make sure blade bolts are tight.
Refer to "Torque Values Chart for Common Bolt Sizes".
Publicité
