Publicité
Les langues disponibles
Les langues disponibles
Manual
Introduction
Thank you for purchasing the LINDY HDMI & DVI with audio to Mini DisplayPort converter. This
device allows you to convert a single link HDMI or DVI signal to a Mini DisplayPort interface. It
also has a 3.5mm jack input port which along with the DVI signal takes analogue audio and
combines it to output both audio and video through the Mini DP port. Included is a Mini DP to
DP adapter to convert HDMI or DVI to DisplayPort.
Package Contents
• LINDY HDMI & DVI to Mini DP Convertor
• 5V DC multi country power supply
• 15cm Mini DP to DP adapter cable
• This manual
Features
• HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
• Supports HDMI single link speeds up to 2.25Gbps (1080p)
• Supports DVI single link speeds up to 1.65Gbps (1920 x 1200)
• DisplayPort 1.1a and DPCP 1.3 compliant
• Supports digital video standards:
o 18/24/30/36-bit RGB/YCbCr 4:4:4
o 12/16/20/25-bit YCbCr 4:2:2
o 6/8/10/12-bit YCbCr 4:2:2 (CCIR-656)
o 36/48/60/72-bit dual bus interface (double data bus width, half clock rate) for
RGB/YCbCr 4:4:4
• HBR (2.7Gbps) and RBR (1.62Gbps) DP link speeds supported
• Built in EDID support
Connections
Make sure all devices are switched off before making any connections!
Connect your HDMI or DVI source device to the HDMI or DVI input port. The DVI signal is video
only, to get audio through the Mini DP port you will need to connect a 3.5 jack to jack cable from
your source to the 3.5mm input port. Then connect the screen with the Mini DP port to the
convertor using a Mini DP male to Mini DP Male cable. You can also connect a screen with a
DP port to the convertor using the Mini DP to DP adapter cable included.
To select the required input, press the "select" button on the front of the unit.
Mac
PC
Blu-Ray
Audio Cable
DVI Cable
HDMI Cable
English
Publicité
