Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Resetting Your Change Filter Indicator
Note: These are the most common filter reset instructions. If the instructions don't work for your
refrigerator brand, see the documentation that came with your refrigerator.
Refrigerator brand
GE
®
Filter Features
• Economical alternative to expensive substitutes
• Easy installation and operation
• Provides cleaner, fresher water by reducing impurities
• Designed to provide up to 6 months of life or 300 gallons
• Does not remove minerals which may be beneficial to health
NOTE: This filter should not be used with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
Frequently Asked Questions
Q: Why is it difficult to twist the new filter into the filter housing?
A: The connector may expand because of water pressure. Therefore, it is recommended you push
the new filter in with a little bit of force, but not too hard. Then turn it clockwise.
Q: Must the filter be changed every 6 months?
A: Yes. You must replace the filter every 6 months or sooner if water flow is reduced or if there is
heavy sediment/rust sediment. Over-used filters will degrade the filtration performance.
Q: Do I need to flush the filter after installation?
A: After installation, it is highly recommended you run water from dispenser for 5 minutes before
using. Water filters are made from advanced coconut carbon block, so there are some carbon
fines in the filter. Flushing removes the carbon fines to produce clean water.
Instructions
Press and hold the reset water filter button on the dispenser for
three seconds.
5
Publicité
