AmazonBasics B07CHCGL24 Mode D'emploi page 4

All manuals and user guides at all-guides.com
Installation
Step 3:
• Install the new filter into refrigerator.
Step 4:
• Twist the filter clockwise until it stops.
Step 5:
• Check the water flow by filling a glass from the refrigerator water dispenser. If the water flow
is slow or there is "chattering", remove and reinstall the filter making sure it is seated securely.
Check again. Run water from the dispenser for 5 minutes at 0.5 gpm (about 2.5 gallons) to
clear the system and prevent sputtering.
NOTE: Initial flow rate may be slower than expected. Full flow rate should be restored within
24-36 hours.
4