2 Install the Hardware
Do not install the hardware until you have
installed the software from the CD.
1 Locate an available USB port on the computer.
2 Remove the protective cap to expose the USB connector.
Insert the G-210H to an available USB port on the
computer. The G-210H's lights turn on if it is properly
inserted.
Never bend, force or twist the G-210H into the
port.
If the G-210H's power (
are not on after you have installed the software
and the G-210H, make sure the G-210H is
properly inserted.
ENGLISH
) and link (
11
) LEDs