Blomberg MDND 1880 Mode D'emploi page 18

6 Maintenance and cleaning
A
Never use gasoline, benzene or
similar substances for cleaning
purposes.
B
We recommend that you unplug the
appliance before cleaning.
B
Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C
Use lukewarm water to clean the
cabinet of your refrigerator and wipe it
dry.
C
Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B
Make sure that no water enters the
lamp housing and other electrical
items.
B
If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C
Check door seals regularly to ensure
they are clean and free from food
particles.
A
To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
C
Do not put the liquid oils or oil-cooked
meals in your refrigerator in unsealed
containers as they damage the
plastic surfaces of your refrigerator. In
case of spilling or smearing oil on the
plastic surfaces, clean and rinse the
relevant part of the surface at once
with warm water.
All manuals and user guides at all-guides.com
Door Glasses
C Remove the protective foil on the glasses.
C There is a coating on the surface of the
C Water-based cleaning products that are
C Non-alkaline and non-corrosive materials
C These glasses are tempered to increase
C A safety film is also applied to their rear
*Alkali is a base that forms hydroxide ions
Li (Lithium), Na (Sodium), K (Potassium) Rb
17
EN
glasses. This coating minimizes the stain
build-up and helps to remove the possible
stains and dirt easily. Glasses that are
not protected with such a coating may
be subject to persistent binding of air
or water based organic or inorganic dirt
such as limescale, mineral salts, unburned
hydrocarbons, metal oxides and sliciones
that can easily and quickly cause stains
or material damage. Keeping the glass
clean becomes too difficult despite the
regular cleaning. Consequently, the
appearance and the transparency of the
glass deteriorates. Harsh and corrosive
cleaning methods and compounds will
intensify these defects and speed up the
deterioration process.
not alkaline and corrosive must be used
for regular cleaning purposes.
must be used for cleaning so that the
service life of this coating lasts for a long
time.
their durability against impacts and
breaking.
surfaces as an extra safety measure
in order to prevent them from causing
damage to their surrounding in case of a
breakage.
(OH¯) when it is dissolved in water.
(Rubidium), Cs (Cesium) and artificial and
radioactive Fr (Fan-sium) metals are called
ALKALI METALS.