Publicité
Les langues disponibles
Les langues disponibles
SETTING UP YOUR SYSTEM
Battery Operation
The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.
1.
Remove the battery compartment cover on the bottom of the camera base, using a small phillips
(cross) head screwdriver.
2.
Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled polarity
markings.
3.
Replace the battery compartment cover using the small screwdriver.
Note: The power LED will flash when the battery charge is low.
Attaching Power to the Camera
1.
Connect the small end of the power adapter into the DC Jack on the back of the camera.
2.
Connect the other end of the adapter into an available wall outlet.
All manuals and user guides at all-guides.com
Remove Screw Using Small
Philips Head Screwdriver
11
Publicité
