RAMIA HB-N1500 Notice D'assemblage page 4

Hint: Before assembly of tool shelf, decide, if you want to have
deeper or shallower shelf.
Grooves down = deep shelf
Grooves up = shallow shelf
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
All manuals and user guides at all-guides.com
WARNING: Wooden parts may be sharp.
Hint: Don´t fill up holes by glue. Just smear (dive) dowels and
insert them into the holes
Before screwing of vice jaws (8), be sure that jaws are parallel
with bench top (1).
Hint: Tighten jaws using spindles. Align jaws with bench top
and then use bolts 6x40mm (14) for attaching jaws to spindles.