Connecting To The Water Supply - Unitekno AKWA 18 SMART PLUS S Manuel D'installation, D'utilisation Et D'entretien

2. POSITIONING
Position the appliance on a stable surface that is able to support its weight (up to 30 kg during operation
depending on the model).
Position the appliance so that it has adequate space around the perimeter (at least 5 cm).
Position the appliance so that there is adequate ventilation at the back (at least 10 cm).
Do not position the appliance in a tight space that does not allow ventilation (e.g. in a closet or
cupboard).
Do not position the appliance so that it is exposed to direct sunlight.
Position the appliance away from possible sources of heat (radiators, ovens, microwave ovens, coffee
machines, stoves etc.).
Position the appliance near an electrical socket and, if necessary, a connection point to the water supply.
3. INSTALLING TO WATER MAINS (20 PLUS VERSO AND 18 SMART PLUS S)
10 cm
05 cm
05 cm
CAUTION
The appliance must be installed by specialist personnel.
If the appliance is not installed by specialist personnel, it may not work correctly or there is a risk of
flooding the place of installation.

3.1 Connecting to the water supply

CAUTION
Connect the appliance to the cold water supply!
Never connect the appliance to the hot water supply.
Install a system stopcock, an anti-flooding device and a check valve on the connection point to the water
supply, as in the following scheme:
|
21
E N