Attention
1. To maximize battery life, it is recommended you use the mouse on a
white or light-coloured surface.
2. If not used, the mouse will enter auto-sleep mode within 60 seconds,
press any button or scroll wheel to activate the mouse.
3. Never use the mouse on a glass or mirrored surface as these
surfaces will cause the mouse to fail temporarily. An uneven,
reflective or light-coloured and 3D mouse pads will affect mouse
performance.
4. This mouse uses optics for shift detection and is subject to the
relevant safety regulations.
5. The 2.4G radio transmission works up to 10 metres. The transmission
distance will be affected by obstructions.
6. Please avoid using the mouse on metal surfaces. Metals, such as
iron, aluminium or copper, shield the radio frequency transmission
and may slow down the mouse cursor response time or cause the
mouse to fail temporarily.
7. If your PC has a metal case that contains aluminium or magnesium,
use the mouse to the side. The display panel may interfere with the
radio frequency signal if you use the mouse directly in front of the PC.
8. Please remove the batteries if you are not going to use the mouse for
a period of weeks or months.
Note on Handling Batteries
• Keep batteries out of the reach of children.
• Replace old or weak batteries promptly.
• Remove the batteries if the mouse is not going to be used for a
prolonged period of time.
Safety Measures
• Any attempt to disassemble, adjust or repair the mouse may result in
exposure to danger and other safety hazards.
All manuals and user guides at all-guides.com