Télécharger Imprimer la page

SOLIS 379 Mode D'emploi page 15

Publicité

Les langues disponibles

Les langues disponibles

Safety instructions when
operating the appliance
• Always use the appliance for
the appropriate purpose!
• This appliance can be used by
children from the age of 8 up as
well as by persons with reduced
physical, sensory or mental
abilities or with lacking experi-
ence and/or knowledge, if these
persons are supervised or have
been instructed how to use the
appliance in a safe way and
have understood the hazards
which could arise from using it.
Children must not play with the
appliance. Cleaning and user
maintenance must not be
carried out by children unless
they are supervised.
• Keep packaging material e.g.
plastic bags out of the reach
of children!
Warning:
Do not use this
appliance near bathtubs,
showers, basins or other
vessels containing water.
Warning!
Risk of electric shock!
Never use the appliance with
wet hands, in the bath or
shower or over a filled wash-
basin. If the appliance falls
into water, remove the mains
plug immediately. Under no
Solis_CompactDryer-Betriebsanleitung.indd 15
All manuals and user guides at all-guides.com
• Never put the appliance on
• Do not place the appliance or
• To avoid damaging of the hair
• Do not cover the air intake or
• Make sure that you switch
• The appliance is fitted with
circumstances reach into
the water when the applance
is still connected to the
power supply!
Warning!
Risk of electric shock!
When the hairdryer is used
in a bathroom, unplug it
after use since the proximity
of water presents a hazard
even when the hairdryer is
switched off.
soft cushions or blankets
during operation!
the connecting cable on hot
surfaces e.g. cooker or similar or
in the vicinity of open flames!
the air outlet should not be too
close to the hair!
air outlet during use!
off the appliance when not in
continuous use!
an overload protection which
switches off in the case of an
overload (e.g. air outlet or intake
is blocked). If the appliance
switches off during use, please
reset the graduated switch to
«0» and wait for approx.
5 minutes. Then, switch on again!
E
15
26.06.14 16:20

Publicité

loading