Nexstar NXBT S130 Manuel D'utilisation page 15

NXBT S130
2.3 Turn On/Off Handsfree
Turn on the Handsfree: Press and hold button
power-up tones, the Blue LED gives 3 quick blinks following by 1 blink per 2 seconds.
This indicates the handsfree is power on.
Turn off the Handsfree: Press and hold button
power-down tones, the Red LED will blink 3 times; then all LEDs are off. This indicates
the handsfree is power off.
2.4 Pairing/Connecting your Handsfree with Bluetooth Equipment
2.4.1 Pairing your Handsfree with Bluetooth handset
Before making and answering calls, you must pair your handsfree with your Bluetooth
handset.
Detailed operation procedures are as follows:
1. Place your handsfree close to your Bluetooth handset, and ensure your handsfree
is power off, handset power on.
2. Press and hold button
alternate continuously. You will hear 2 power-up tones to indicate that the
handsfree has successfully entered the paring mode.
for at least 8 seconds until the Blue and Red LEDs
14
for at least 4 seconds, you will hear 2
for at least 4 seconds, you will hear 2