UTRAI Jstar One Mode D'emploi page 13

All manuals and user guides at all-guides.com
• When using the clamps, DO NOT connect the RED clamp to the vehicle
battery's negative (-) terminal, or the BLACK clamp to the vehicle battery's
positive (+) terminal.
• When connecting smart clamps to the battery terminals, ensure the copper
teeth on each side of the clamp make good contact with the terminal. The better
the connection, the easier it will be to start your vehicle.
NOTE: When adjusting the clamps please be sure to disconnect your Jump
Starter first. This will prevent the occurrence of minor sparks.
• How to Jump Start Your Car
Step 1: Insert the plug of the battery clamps completely into the jump starter, the
red and green lights flashing alternately.
Step 2: Connect the red clamp to the positive electrode (+) of the car battery and
the black clamp to negative one (-). The green light is always on.
RED BLACK
— 07 —