Télécharger Imprimer la page

Hunter HEPAtech Plus 37710 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

Air Purifier Maintenance
Cleaning Your Air Purifier
Proper maintenance of your Hunter Air Purifier will help ensure years of trouble free
service.
Follow these steps to properly maintain your air purifier:
1. Approximately every 90 days, the outside of the unit should be cleaned with a soft,
damp cloth.
2. If needed, the front grill can be removed from the unit and cleaned with soapy water.
Simply remove the pre-filter before exposing the grill to water.
3. Follow the instructions in Changing the Pre-Filter and Changing the Filter (pgs. 10 and
11) to determine when and how to replace the filters.
NOTES:
• The air purifier must be unplugged during the cleaning process.
• Be sure the unit is completely dry before plugging in and using.
• Never immerse unit in water.
Changing the Pre-Filter
When the Pre-Filter exceeds 1400 hours (refer to Filter Life Counters for additional informa-
tion, pg. 8), the Pre-Filter indicator will turn on as a reminder that you should replace the
pre-filter. To maintain proper odor-removing capability and overall filtration performance,
the pre-filter should be changed every 1400 hours (approximately 3 months of use). If
necessary, the pre-filter can be changed more often. Proper maintenance of the pre-filter
will help extend the life of the HEPAtech
13) if you need help finding replacement filters.
To change the pre-filter and reset the Pre-Filter Life Counter:
1. First, turn off and unplug the air purifier.
2. Next, remove the front grill. Place your fingers under the handle on the grill
and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3. The pre-filter is attached to the inside of the grill with hook tape. Pull gently
on the pre-filter to remove it. Refer to Fig. 9.
4. If needed, use a soft damp cloth to wipe off the grill.
5. Install the new pre-filter by placing it in the grill and pressing gently on the
pre-filter so that it adheres to the hook tape. You may notice a few black par-
ticles coming off the pre-filter. Those particles are part of the odor-removing
activated carbon and will be collected on the filter during regular use.
43007-01
All manuals and user guides at all-guides.com
filter. Refer to Obtaining Replacement Filters (pg.
®
10

Publicité

loading

Ce manuel est également adapté pour:

Hepatech plus 37711