Wagan Tech 4800 Guide D'utilisation page 5

ADVANCED OPERATION (CUSTOMIZE)
Follow the instructions in this section to customize the light settings such as brightness and
duration in the Constant Lighting Mode and the brightness in the Sensor Mode using the remote
control.
The light will flash once after each button press.
Advanced Constant Lighting Mode
The light will stay on for the duration of time and brightness selected. After the selected time
period has transpired, the Light will switch to Sensor Mode.
1. Press the Constant Lighting Mode
2. Press one of the 6 time buttons (2H, 4H, 6H, 8H, 10H, 12H)
3. Press one of the 3 Brightness buttons (60%, 80%, 100%)
Example Scenario:
1. Press
2. Press 2H button
3. Press 80% button
The Light will turn on automatically at night and stay on at 80% brightness for 2 hours
and then switch to Sensor Mode.
Advanced Sensor Mode
When motion is detected, the Light will turn on at the brightness you choose. After 20 seconds of
no motion, it will dim to 30% of the previously set brightness.
1. Press the Sensor Mode
2. Press one of the 3 Brightness buttons (60%, 80%, 100%)
Example Scenario:
1. Press
2. Press 60% button
The Light will turn at 60% brightness when motion is detected and then dim (30% of
60%) after 20 seconds of no motion.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
button on the remote
button
button
button
©2020 Wagan Corporation. All Rights Reserved.
5