Nicols PAR COB 100 MW II Notice D'utilisation page 9

.
Upright
The product can be mounted in an upright or sitting position using the supporting brackets.
NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of the product using
the two adjustment knobs located on the side of the fixture.
Product introduction
This product is designed for indoor use. Suitable applications include wash or effect lighting for architectural, stage or
nightclub applications. This product can also be installed for use in signage and advertising using the dynamic functions
available with DMX512 control. Direct input of DMX512 signal allows the units to be controlled from any DMX512 controller.
This product can be operated as a single unit or in multiple units for large applications.
TECHNICAL SPECIFICATIONS
* LED PAR COB 100W 2 in 1 CW/WW
* IP33
* LEDs: COB 100W 2 in 1 cold white / warm white
* DMX channels : 6
* Control: Auto, DMX, Master/Slave, sound-active
* Dimmer: 0-100% / Strobe 0-20Hz
* Beam angle: 75°
* Consumption: 150W
* LED display
* Lifespan : around 50 000 hours
* Voltage: AC100-240V, 50/60Hz
* Size: 290 x 220 x 325 mm
* Net weight: 2.8kg
DMX CHANNEL
6CH Function
CH1 Master Dimmer
CH2 Master Strobe
CH3 Built-in programs
CH4 Speed control
CH5 WW Dimmer
CH6 CW Dimmer
Function Instruction
CW,WW linear 0%-100% dimmer, from dark to bright
CW,WW strobe,from slow
to fast
Built-in programs
Speed control ,from slow to fast
WW dimmer, linear 0%-100%
CW dimmer, linear 0%-100%