Publicité
Les langues disponibles
Les langues disponibles
Section
04
Tuner
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Band indicator
Shows which band the radio is tuned to, AM
or FM.
2 Frequency indicator
Shows to which frequency the tuner is
tuned.
3 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
1
Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2
Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3
Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1, F2, F3 for FM or AM.
4
To perform manual tuning, briefly press
c or d.
The frequencies move up or down step by
step.
5
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
12
En
All manuals and user guides at all-guides.com
1
2
3
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Publicité
