EN
22
CLEANING AND CARE
•
Unplug the unit and let it cool completely.
•
To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth..
•
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
•
Although this heater is outdoor approved, DO NOT immerse the heater in
water for your safety.
•
The light source of this luminaire is not replaceable; when the light source
reaches its end of life the whole luminaire shall be replaced.
•
Wait until the unit is completely dry before use.
•
If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair
of service:
•
Check if the power cord is plugged into an electrical outlet, if not plug in.
•
Check if electricity to the main fuse is working.
•
Make certain the power switches are turned on. If not, choose a setting.