Publicité
Les langues disponibles
Les langues disponibles
Fax +32 2 359 95 50
Do not try to repair the winding-on spool yourself. Make sure it is repaired by a competent
qualified electrician
Do not block the vacuum passage. If this should happen by accident, unplug the
appliance before unblocking it.
Make sure not to point the vacuum cleaner at persons or animals, and especially stay
clear of eyes and ears.
If you use the appliance with a damaged dust bag or air filter, the appliance might get
damaged. Make sure to check the good quality and placement of the dust bag and/or
filter.
Never use the appliance without dust bag!
If your appliance no longer vacuums correctly or if the dust bag level indicator becomes
red, change the bag or empty the compartment (model with filter) before the appliance
overheats.
Your appliance must never be switched on through an external timer or any kind of
separate remote control system.
Competent qualified electrician: after-sales department of the producer or importer or any
(*)
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
IMPORTANT INFORMATION
To avoid unnecessary overheating of the engine, switch off the appliance after 30 minutes and
let it cool off for approximately 20 minutes. In the meantime you can wash out the permanent
filters (motor filter and air filter) and replace the dust bag if necessary, but be careful not to use
the appliance when the filters are not dry! (see section "Replacing the dust bag and cleaning
the filters"). If you respect these guidelines, you will enjoy the use of this appliance for a long
time.
ASSEMBLING THE VACUUM CLEANER
Unpack the appliance and all accessories.
All manuals and user guides at all-guides.com
Copies of the I/B. Please reproduce them without any
changes
except
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
.
(*)
Insert the connection piece of the flexible hose into the
hose connection inlet on top of the appliance. Press until it
clicks. To remove the flexible hose, press on the two release
buttons of the connection piece and pull it out of the
appliance.
12
Assembly page 12/32
under
special
instruction
TKG VC 1011 - 150506
from
Team
Publicité
