Publicité
Les langues disponibles
Les langues disponibles
Targus Desktop USB 2.0 7-Port Hub with 3 AC Surge Protected Power Sockets
All manuals and user guides at all-guides.com
Using the Wall-Mount
You can hang the desktop hub against walls.
The wall can be made of cement, wood, or drywall.
Figure 1-1 and Figure 1-2 shows the recommended sizes (in mm) of the metallic
screws and anchor kits used for mounting:
Figure 1-1 Metallic Screw
Figure 1-2 Anchor kit illustration
The wall-mount procedure is as follows (see Figure 1-3):
1) Drill two holes in the wall on the same horizontal line, with a distance of
138 mm.
2) Insert anchor kits into the holes.
3) Drive the screws into the anchor kits, keeping the screws 1.5 mm out of the wall.
Figure 1-3 Wall-mount illustration
4) Aiming at the two screws, hook the two mounting holes of the switch on the
screws.
Caution: When mounting the Power Hub, keep the USB ports of the Hub facing
downwards.
Note: The socket outlet shall be installed near the equipment and shall be easily
accessible.
4
Publicité
