Bryton Aero 60 Guide De Démarrage Rapide page 4

All manuals and user guides at all-guides.com
To perform Data Sync, please first go to your device : Settings>Network>Connect to set a wireless network
connection, then go to Data Sync in the main menu and let your Aero computer smartly guide you through the
syncing process.
Note:
● It usually takes longer to download and install Firmware updates, select NO if you prefer to update it on your
next sync.
Upload/Share Your Tracks via USB
1. Connect the device to your computer via USB cable. 2. Select fit files from Bryton folder in the device.
3. Upload files to brytonactive.com and popular training sites including STRAVA, TrainingPeaks, Endomondo,
Map My Ride, Fit track and many more.
Icon Description
Bike 1/2
No Signal (not fixed)
Weak Signal (fixed)/
Strong Signal (fixed)
Power Status
Reboot Device
Press( / /
Note:
● For Firmware Update, please go to www.brytonsport.com>
● For Video Instructions, please go to www.brytonsport.com>
● For User Manual, please go to www.brytonsport.com>
● Condensation normally doesn't denote water damage, but is caused by environmental humidity and temperature changes.
Open back cover and allow air to flow until clear. Go to www.brytonsport.com>
3
Heart Rate Sensor Active
Cadence Sensor Active
Speed Sensor Active
Dual Sensor Active
/ ) at the same time to reboot the device.
(Menu) > Support > Download.
(Menu) > Support > Tutorial.
(Menu) > Support > Download > Manual > User Manuals.
(Menu)>Support>FAQs for more info.
Power Meter Active
Log Record in Progress
Recording is paused
Current speed is faster/
slower than average speed