Publicité
To Drop or Raise the Feed Dogs
The drop feed dogs lever is located underneath the free
arm bed on the back side of the machine.
1
To drop the feed dogs, push the lever in the direction
of the arrow, as illustrated.
2
To raise the feed dogs, push the lever in the direction
of the arrow, as illustrated, and turn the handwheel
toward you. Feed dogs must be up for normal sewing.
Darning
1
Stitch selector:
2
Stitch width:
3
Stitch length:
4
Needle thread tension:
5
Pressure adjusting lever:
Presser foot A:
6
7
Presser foot F:
8
Feed dogs:
Drop the feed dogs. Center the hole in the fabric on an
embroidery hoop, as shown.
Lower the presser foot F and sew at a slow speed.
Move the fabric back and forth slowly until the darning area
is covered. Turn the fabric 1/4 turn (90°), and sew another
layer of stitching over the first layer. After darning is
completed, return the pressure adjusting lever to 3 for
normal sewing.
NOTE:
If the fabric is thin or badly damaged, use a separate
piece of fabric under the hole to reinforce it.
All manuals and user guides at all-guides.com
4 to 6
5
Any
2 to 6
0
Zigzag foot
Satin stitch foot
Dropped
1
2
1
4
5
5
4
3
46
1
2
2
3
6
7
8
or
o
ou
Publicité
