Publicité
GB
How to charge battery of GPS 20C:
Insert the mini USB plug from USB cable into the mini USB port of
GPS 20C.
Lights red while the battery is being recharged and
takes off when charging is complete
Connecting of the Bluetooth GPS receiver:
1. Switch on your Bluetooth GPS receiver.
2. Enable the Bluetooth device on your PDA or notebook PC
according to the instructions.
3. Then connect it to the Bluetooth GPS receiver.
4. The Bluetooth indicator (blueLED) is always ON if it is successfully
connected to your PDA or notebook PC. You can confirm the
connection with the Bluetooth software on your PDA or notebook PC.
Caution!
Some Bluetooth devices require an authorization code.
This code is "1234".
8
Publicité
