Salton elite SETB14 Manuel D'instructions page 6

Operation
- Place the main body on a flat surface.
- Assemble the plastic jar.
- Check that the jar is locked on the main body.
- Check if the switch is in the off position.
- Plug the blender into an electrical outlet.
- Add ingredients into the jar; cover the jar with the lid.
- Turn the switch to your chosen speed:
"OFF" – power off
"1" – minimum speed
"2" – maximum speed
- See the table for approximate timing.
Turn the "Pulse" control or press the "Turbo" button
-
during operation to achieve the desired blending
effect.
To stop the operation, turn the switch to "OFF" position.
-
- Wait until the motor stops completely, then remove the
jar from the body.
- Unplug the blender after use.
Care and Cleaning
Switch off the appliance before changing accessories or cleaning
it.
To maintain your blender in best quality, always clean the jar
every time after use.
- Unplug the blender
- Rinse and dry thoroughly
- Clean the motor with a damp cloth, never immerse
it in water or place it under running water
- Place the blender in a safe place
The Maximum operation
level is 1.75L. Do not
blend more than 1.75L
ingredients.
Do not remove the lid
from the jar while the
motor is on.
Stop the blender before
adding new ingredients or
use the measuring cup to
add ingredients.
The blade is very sharp.
Wash with care. Never
touch the blade with your
finger.