Salton elite SETB14 Manuel D'instructions page 5

Before First Use
•
Unpack the blender.
•
Place the base on a flat surface.
•
Clean the main body with a damp cloth.
•
Never immerse the appliance motor in water or place
it under running water.
•
Wash the jar, lid and blade in warm water.
•
Rinse and dry thoroughly.
How to Assemble the Appliance
To use your blender, you must check the blade assembly unit carefully every time before use.
Step 1:
- Insert the blade assembly unit onto the plastic jar by rotating it anti-
clockwise. You can see the "lock" arrow direction at the bottom of the blade
assembly unit.
Step 2:
- Place the jar assembly onto the main body. Lock the jar assembly clockwise
according to the "lock" arrow on the main body. To release the jar assembly,
turn it in an anti-clockwise direction.
Insert/open logo
PS: Make sure the glass jar is in position tightly.
The blades are very
sharp.
Wash with care.
Never touch the blade
with your finger.
Lock logo