ClearSounds A600 Manuel D'utilisation page 29

Delete/Terminate Handset
█
This function allows you to delete a handset that is registered
to the base.
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press the Select soft key to select Terminate HS. You
will be prompted to enter the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the OK soft key. If the PIN is validated, you will see a
list of registered handsets.
5. Press up
that you would like to delete and press the Select soft
key. The selected handset will no longer be registered
to the base.
NOTE: If you selected the current handset or a non-registered
handset, a warning tone will be heard.
█ Base Reset
This function allows you to reset the base settings for Dial
Mode and Flash Time to the initial factory settings. To reset
the base:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key. You will be prompted to enter
the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the Reset soft key. If the PIN is validated, the base
settings will be reset to the initial factory settings,
otherwise the settings will remain.
5. After resetting, the handset will return to standby
mode.
All manuals and user guides at all-guides.com
or down
or down
or down
or down
29 – ENGLISH
to scroll to BS Settings and
to scroll to the desired handset
to scroll to BS Settings and
to scroll to BS Reset and then