This instruction manual must be read and understood by all individuals using the machine, including
those involved in its maintenance.
The Romus stripper is manufactured in accordance with the technical regulations in the applicable
European directives. Incorrect use may cause injury to the operator. See the section on using the
appliance.
The ROMUS stripper is designed exclusively for stripping floor coverings in dry rooms. Usage other
than for this purpose or over and above it shall be deemed non-compliant with the intended purpose
and ROMUS shall not be liable under the warranty for any resulting damage.
Original spare parts and accessories are specially designed for the ROMUS stripper. Your attention is
drawn to the fact that other parts must not be used. They could adversely affect the safety of the
machine.
This is especially applicable to the machine's blade. Romus declines all responsibility for damages
caused by the use of non-original spare parts.
The machine was delivered to the user in accordance with the conditions valid at the time of
purchase. The user may not modify the machine for any reason. In the event of defects, the user
should contact the
Romus after-sales department. Any attempt by a user or unauthorised staff member to dismantle or
modify a component leads to expiry of the warranty, and ROMUS shall not be liable for any damage
or injury to the persons and objects concerned by these modifications. Thus, ROMUS shall not be
liable in the following cases:
Faulty installation:
-
Incorrect use of the machine by staff members who have not received appropriate training
-
Use contrary to the standards in force in the country of use
-
Recommended maintenance not carried out or poorly carried out
-
Use of non-original spare parts or spare parts which do not correspond to the model
-
Total or partial non-compliance with instructions.
-
All manuals and user guides at all-guides.com
Risks when handling the machine
Use consistent with the intended function
Original spare parts and safety
Warranty
Description of the operating station
Décolleuse « BS-1 » | Réf. 94525
13