agri Shop 81 71 81 Mode D'emploi page 22

Before first Use
Take the farm jack out of the packaging and check for any damage in
transit. Dispose off packaging materials or store it out of reach of children.
Lifting the Load
1. Place the farm jack on a firm and level
ground.
2. Position the farm jack upright and place
the lifting clamp (3) under the correct
lifting point for the load to be lifted.
3. Lift the lever (2) upright so the lever is
parallel to the steel bar (1), (Step 1.).
4. Insert the sleeve (4) on the reversing
latch (7). See also the picture on the
bottom right side (Step 2.).
5. Now roughly lift up the reversing latch (7)
in order to engage in place (Step 3.).
6. Hold the farm jack straight upright and move the lever up and down.
The lifting clamp will raise and lift the load. Each time you move the
lever up and down you will hear a "click" sound. After each "click"
sound move the lever completely upright and repeat pumping until the
load is lifted up to the desired height.
Lowering the Load
1. Position the lever (2) parallel to the steel bar (1).
2. Insert the sleeve (4) on the reversing latch (7)
(see picture) and roughly press down the revers-
ing latch in order to disengage the latch.
3. As soon as the reversing latch (7) is disengaged,
move the lever (2) up and down. If the load has at
least 75 kg, the lifting clamp will be lowered slowly
each time you pump the lever up and down.
All manuals and user guides at all-guides.com
Using
18
3.
1.
2.